Zhejiang DVR200 series, Быстрое руководство

Страница: 21 / 48

13
Connecting to a PTZ via RS485 interface
The RJ45 connector should be connected with the PTZ control cable as
follows:
z
The RJ45’s RS485+ terminal is connected to the PTZ; RJ45’s
RS485 ‐ terminal is connected to the PTZ, as shown in the
following figure.
z
If the PTZ is grounded, the PTZ control cable's G terminal is
connected to the RJ45 connector's Terminal G (No.5).
z
For connection with several PTZs, connect the control cables of
the PTZs and follow the figure below for further connection.
1: PTZ’s RS485 control
cable
2: PTZ’s RS485+ terminal
3: RJ45’s RS485+ terminal
4: PTZ’s RS485 ‐ terminal
5: RJ45’s RS485 ‐ terminal
6: Twisted pair
Connecting to a third ‐ party device via RS485 interface
A third ‐ party device control cable must be an RS485 cable that meets
the following requirements:
z
The RJ45’s RS485+ terminal is connected to the RS485+’s
third ‐ party device; RJ45’s RS485 ‐ terminal is connected to the
RJ45 connector’s RS485 ‐ terminal, as shown in the following
figure.
z
If the third ‐ party device is grounded, the third ‐ party device
control cable's Terminal G is connected to the RJ45 connector's
Terminal G (No.5)