SPECIFICATIONS
Work area safety
CDL1801
CDL2101
1. Keep work area clean and well lit. Cluttered or
Machine
Screw
dark areas invite accidents.
Standard
Bolt
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1.76
1.9
4. Power tool plugs must match the outlet. Never
D.C 18V
D.C 21.6V
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
• Due to our continuing programme of research and
tools. Unmodified plugs and matching outlets will
development, the specifications herein are subject to
reduce risk of electric shock.
change without notice
5. Avoid body contact with earthed or grounded
without notice.
surfaces such as pipes, radiators, ranges and
• Note: Specifications may differ from country to
refrigerators. There is an increased risk of
country.
electric shock if your body is earthed or grounded.
General Power Tool Safety
6. Do not expose power tools to rain or wet
Warnings
conditions. Water entering a power tool will
WARNING Read all safety warnings and all
increase the risk of electric shock.
instructions. Failure to follow the warnings and
7. Do not abuse the cord. Never use the cord for
instructions may result in electric shock, fire and/or
carrying, pulling or unplugging the power tool.
serious injury.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
Save all warnings and
increase the risk of electric shock.
instructions for future reference.
8. When operating a power tool outdoors, use an
The term "power tool" in the warnings refers to your
extension cord suitable for outdoor use. Use of
mains-operated (corded) power tool or battery-operated
a cord suitable for outdoor use reduces the risk of
(cordless) power tool.
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
MODEL
Rated Voltage
Max.Torque (NM)
Baterry Capacity
Length
（
MM)
Charge time
Weight including
battery(KGS)
173
M4-M10
No load Speed(rpm)
Impacts per minute
M4-M16
0-2200
0-3200
180
1H
Toolholder
1/4"
Capacities
3.0AH
2
Содержание CDL1801
Страница 9: ...9...
