2. Do not disassemble battery cartridge.
3. If operating time has become excessively
FUNCTIONAL DESCRIPTION
shorter, stop operating immediately. It may
CAUTION:
result in a risk of overheating, possible burns
• Always be sure that the tool is switched off and the
and even an explosion.
battery cartridge is removed before adjusting or
4. If electrolyte gets into your eyes, rinse them
checking function on the tool.
out with clear water and seek medical
Installing or removing battery cartridge
attention right away. It may result in loss of
your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing battery cartridge in a
container with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
• Always switch off the tool before installation or
A battery short can cause a large current
removal of the battery cartridge.
flow, overheating, possible burns and
• To remove the battery cartridge, withdraw it from
even a breakdown.
the tool while sliding the button on the front of the
6. Do not store the tool and battery cartridge in
cartridge.
locations where the temperature may reach or
• To insert the battery cartridge, align the tongue on
exceed 50
ﾟ
C (122
ﾟ
F).
the battery cartridge with the groove in the housing
7. Do not incinerate the battery cartridge even if
and slip it into place. Always insert it all the way
it is severely damaged or is completely worn
until it locks in place with a little click.
out. The battery cartridge can explode in a fire.
• Do not use force when inserting the battery
8. Be careful not to drop or strike battery.
cartridge. If the cartridge does not slide in easily, it
9. Do not use a damaged battery.
is not being inserted correctly.
Switch action
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before
completely discharged.
Always stop tool operation and charge the
battery cartridge when you notice less tool power
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
CAUTION:
3. Charge the battery cartridge with room
• Before inserting the battery cartridge into the tool,
temperature at 10
ﾟ
C - 40
ﾟ
C (50
ﾟ
F - 104
ﾟ
F).
always check to see that the switch trigger
Let a hot battery cartridge cool down before
actuates properly and returns to the "OFF" position
charging it.
when released.
1. Button
2. Battery cartridge
1. Switch trigger
5
Содержание CDL1801
Страница 9: ...9...
