ZHEJIANG ZHENGXING FITNESS EQUIPMENT ZX3500, Руководство пользователя

Страница: 18 / 26

18
1.power plug get loose
1.check the plug and
make sure the wire
connect well
1.connect the wire
again
Power on , no
reaction in the
computer
2.power switch not open 2.check the switch
2.turn on the power
again
1.Motor circuit abnormal
1.check the motor
circuit, if they are
correct plug and plug
well
1.Replug the motor
line
2. Not press the
“START” button
2.check the “START”
button, it may useless
or not press
2.repress the button
3.the safety lock may
loose or dropped
3.check safety lock 3.place the safety lock
4.The motor plug loose
or damaged
4.test the motor 4.change the motor
The Motor Doesn’t
Work
5.The specification of
the power or the
controller not correct
AC
（
110/230
）
V
5.make sure the
specification Choose the correct
specification
1.check the distance
from the magnet and
the sensor position 1.adjustment the
distance in 5mm to the
magnet
2.the wires may
damaged or not
connect well
2.change the wires or
sensor
The Motor and
Other Parts is ok,
but the Treadmill
doesn’t running
SENSOR induction bad
3.the joints may not
connect well 3.connecting the joints
again
The Display
Content not clear
PA circuit board screw
not clock well or the
connector not connect
well
Check the circuit make
it connect well
Reset the connector
and lock the screw
tightness
1.check the wires’
connection 1.connect again or
change
1.SENSOR induction
bad
2.check the joints
2.connect again
2.human induction not
sensitive
（
ear clip
）
3.Knead the earlobe
several times.
Retest
No pulse data
display
3.human induction
bad(hand pulse
）
4.wetting hands or do
some friction.
Retest
1.check the connection
line between the
computer and the
controller
1.change the line
E01(fault code)
the computer and the
controller
Communication
abnormal
check the joints 2.connecting the
joints again
E02(fault code)
Explosion-proof
protection
1.the power and
voltage is less than
50% normal
1.use the right power
and voltage