10
It needs to implement the operation when the device is equipped with waterproof connector and
it is used outdoors.
Figure 2-3
Step 1
Keep the convex groove outward and install the rubber ring into the network port, keep the
smaller hole of the rubber ring outward and install the fixing rubber ring into the main body of the
waterproof connector.
Step 2
Pull the network cable without crystal head through main body of waterproof connector, fixing
rubber ring and waterproof locking cover, make the crystal head of network cable, and then insert
it into the network cable.
Step 3
Put the main body of waterproof connector on the network port and rotate it clockwise to lock the
network port and waterproof connector firmly.
Step 4
Put the waterproof locking cover on the main body of waterproof connector and rotate it
clockwise to lock the waterproof connector and waterproof locking cover firmly.
2.4 Adjust Device Angle
Users can directly use hands to adjust the lens horizontally
It needs to use wrench to adjust lens vertically, insert the wrench into the screw holes and
move the wrench up and down to rotate the lens vertically.
It needs to use wrench to adjust image horizontally, insert the wrench into the screw hole
and move then wrench with 360
°
axis to make the image rotate.
Note
The range of lens adjustment angle: vertical rotation direction (0
°～
+85
°
), image horizontal
rotation direction (0
°～
+355
°
), image rotation direction (0
°～
+360
°
).
