DATA MANAGEMENT
CAUTION
The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All other records
are pushed back one digit (e.g., 2 becomes 3, and so on), and
the last record (60) is dropped from the list.
If you want to check the other user’s
measurement records, please press
“
” button to turn off the blood pressure
monitor. Then press and hold “ ” button to
enter the selecting user mode, press “ ”
again to change the user, when the desired
user ID blinks, press “ ” button to confirm.
Then press“ ” button to check the records
of the selected user.
3
.
1.
2.
If you did not get the correct measurement, you can delete
all the results for the selected user by following steps.
(Take user 1 for example.)
Delete the Records
Press “ ” button to confirm ,the
LCD displays “ User ID+dEL donE”
and then turn off.
Note: To exit out the delete mode
without deleting any records, press
“
” button before pressing “ ”
button to confirm any delete
commands.
Hold pressing “ ” button about 3
seconds when the monitor is in the
memory recall mode , the “dEL All
+User ID ” will flash on the display.
DATA MANAGEMENT
DATA MANAGEMENT
27
26