background image

Tips: 

A.  You can press “            ” button at any time to stop measuring during the 

process of measurement.

B. Maximum 60 records are both for USER 1 and USER 2.

C. If the measurement result is out of the measurement range (SYS: 60mmHg to

    230mmHg; or DIA: 40mmHg to 130mmHg;or Pulse: 40-199 pulse/minute), the 

LCD will display “out”.

CAUTION

 

1. 

2.  

Interference may occur in the vicinity of equipment marked with the following symbol

     . And UAM-880 may interfering vicinity electrical equipment.

Sensitive people, including pregnant women pre-eclamptic and those who implanted 

medical electronic instruments, should avoid using the unit whenever possible.

Keep the monitor at least 20 centimeters away from the human body (especially the 

head) when the data transmission is proceeding after measurement.

To enable the data transmission function, this product should be paired to Bluetooth 

end at 2.4 GHz.

How to mitigate  possible interference?

The range between the device and BT end should be reasonably close, from 1 meter 

to 10 meters. Please ensure no obstacles between the device and BT end so as to 

obtain quality connection and to lower the RF output range.

To avoid interference, other electronic devices (particularly those with wireless 

transmission / Transmitter) should be kept at least 1 meter away from the monitor. 

Recall the Records

2

. Press the “        ” button again to rotate the records. The order of the record, 

date and time will be displayed alternatively.

1

.When the monitor is off, please press “        ” button shortly to show 

the average value of the latest three records. If the records are less than 

3 groups, it will display the latest record instead.

(Take user 1 for example.)

The most recent record (1) is shown first.  Each new measurement is 

assigned to the first (1) record. All other records are pushed back one 

digit (e.g., 2 becomes 3, and so on), and the last record (60) is dropped 

from the list.

CAUTION

The current No. is No. 1.

Ten records in total.

The corresponding 

time is  10:00.

The corresponding 

date is May 5   .

th

Bluetooth Module No.: 

Transmitting Distance: 

1-10 meters

RF Frequency Range:

 2.402 - 2.480 GHz

Output Power Range: 

Supply Voltage: 

LS51802

 -6dBm -4dBm

1.8V - 3.6V

17

16

DATA MANAGEMENT

MEASUREMENT

Содержание UAM-880



















Отзывы: