STANDARD OPERATING PROCEDURE
String Inverter Installation – Zeverlution Series
Version 1.2 Effective date 02/08/2017
Page 13 of 15
Ethernet cable directly to the router. Refer to Section 6.3.2 for connecting the inverter using
Ethernet.
6.3.1
Connecting the inverter to the internet using WIFI
1.
Install the supplied WIFI antenna to the
bottom of the inverter before setting up
the WIFI connection.
2.
With the inverter powered up, use a
smartphone or laptop to search for the
inverter’s wireless access point. This
will display as ZEVERSOLAR-XXXX.
Connect to this using the password
‘zeversolar’.
3.
Open a new browser window and
enter
bar to access the inverter settings
interface.
4.
If the address cannot be loaded, press
the button on the inverter display to
cycle through the menu until an IP
address is displayed. If this isn’t
160.190.0.1 use the IP address shown
on the inverter’s display .
