6
V01
Installation and Operating Instructions
2 Safety
2.1 Intended use
2.1.1. Eversol converts the direct current from a PV array into grid-compliant
alternating current.
2.1.2. Eversol is suitable for indoor and outdoor use.
2.1.3. Eversol must only be operated with PV arrays (PV modules and cabling) of
protection class II, in accordance with IEC 61730, application class A.
Do not connect any sources of energy other than PV modules to the Eversol.
2.1.4. PV modules with a high capacitance to ground must only be used if their
coupling capacitance does not exceed 1.0
μ
F.
2.1.5. When the PV modules are exposed to sunlight, a DC voltage is supplied to this
equipment.
2.1.6. When designing the PV system, ensure that the values comply with the
permitted operating range of all components at all times. The free design
program "Zeverplan" (http://www.zeverplan.com) will assist you.
2.2 Safety standards
Eversol inverters comply with the EU Low-Voltage Directive 2006/95/EC and the
EMC Directive 2004/108/EC. They are labeled with the CE mark. For more
information about certificates in other countries and regions, please visit website
www.zeversolar.com
.