14
V01
Installation and Operating Instructions
CAUTION!
Risk of injury due to the heavy weight of the inverter!
• When mounting,
take into account that the inverter-weighs approx. 14 kg .
CAUTION!
Risk of injury if the inverter falls down!
• Before inserting screw anchors, measure the depth and distance of the holes.
• If the measured values do not fulfill the mounting requirement, redrill the
holes.
4.3 Mounting the inverter with the wall mounting bracket
Mounting procedures:
1.
Use the wall bracket as a drilling template and
mark the positions of the drill holes, then drill
4 holes (
φ
10) to a depth of 55 to 60mm.
During operation, keep the drill vertical to the
wall, and hold the drill steady to avoid tilted
holes. After cleaning the dust from the holes,
measure their net depth.
2.
After drilling holes in the wall, place four screw anchors into the holes, then
attach the wall mounting bracket to the wall using the self-tapping screws and
washers delivered with the inverter.