20
V01
Installation and Operating Instructions
Procedure
1.
Switch off the circuit breaker and secure it against being inadvertently switched
back on.
2.
Guide the pressure screw (D) over the AC cable.
3.
Guide the threaded sleeve (B) with the sealing ring over the AC cable.
4.
Bend the AC cable. The bending radius must be at least four times the cable
diameter.
5.
Shorten the cable, the PE protective conductor (green-yellow) must be longer
than the insulated conductors of N and L.
6.
Shorten the line conductor L and neutral conductor N by 4 to 5 mm.
