DOC-USR-0070-08
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
40
8.4
Configure and Run Decoder
(6)
Click on the “CH1” tab and change the settings to match the output of your encoded stream. For
decode of the previously recorded .ts file, use the following configuration example by selecting
“TSFILE” as the “Input Interface” and entering “/media/sda1/encode_sme01.ts” for the
“Location”.
(7)
After about 5-10 seconds, decode will start and you will see video on the TV/monitor.
Figure 43 Decoder Configuration Settings for Decode Example
(2) Enter path to the file
(3) Click “start”
(1) Change to “TSFILE”