Zetta ZIR32 Infrared HD Security Camcorder Quick Start Guide
www.zetta.com.hk
Operation:
Application: For example, GSM alarm or buzzer
Standby
The recorder keeps in standby state if there is no any
triggers*
. The trigger output is open.
Triggered
Whenever ZIR32 is recording or detects any
triggers*
, the trigger outputs will be shorted.
* Triggers include voice trigger, motion trigger, vibration trigger, PIR trigger and
external trigger-in.
Figure 5
Figure 6
B. Aux-Trigger Out Contact Type - Normal Close
Instructions:
1. Run Zetta Widget->Choose Option-> Custom Mode->Save Option, then choose Settings->
Aux-Trigger Out Contact Type-> Normal Close and press Sync Settings to DVR.
2. Put the mode switch to the custom mode position.
3. Connect ZIR32 to the external device (suggest using AWG26 wire). The connector screw is
on the top of ZIR32.
ZIR32 Trigger out +(Pin5) should connect to external device Trigger in +.
ZIR32 Trigger out - (Pin6) should connect to external device Trigger in -.
4. Turn on ZIR32 after connecting the wire correctly.
Note: 1. Please make sure the voltage input to ZIR32 trigger out +(Pin5) is under
24V and the current is less than 1A.
2. Please make sure the current direction is correct. Otherwise, ZIR32 may
be damaged.
Operation:
Application: For example, GSM alarm or buzzer
Figure 7
Figure 8
9
10
