05
Appendix H: Viavi CX300 Tests
MAINTENANCE GUIDE | MT-4E ANALOG & P25 DIGITAL RADIO SYSTEMS
Audio Connections
The Receiver, Transmitter and Auxiliary Balanced audio lines are available for connection on Zetron extender
cards or by connecting to the optional back panel A-PNL-AUX96-3 screw-type terminal connector. The
extender cards have solder points available on each signal line that can have a small test point (5059-
TP110300) that is supplied with the extender card, soldered to them for easy connection with clip-on type clips.
Recommended Test Points are:
Audio Control Card and Base Control Card Extender Card pins (EC-96D1 and EC-96K-1.22):
Auxiliary 1 Audio Output = B11 and A11
Auxiliary 2 Audio Output = C1 and C3 (Audio Control Card); C2 and C4 (Base Control Card) Auxiliary 1 Audio
Input = C19 and C20
Auxiliary 2 Audio Input = B14 and A14
Receiver and Transmitter Extender Card pins (EC-48RD and EC-48RK-1.22):
Rx Balanced Audio Output = B26 and Z26
Tx Balanced Audio Input = B18 and Z18
Tx Subtone Input = B22 and Ground (B32)
The test points can be soldered into the extender cards as shown in Figure H-1.
Figure H-1: EC-96D1 and EC-48RD Direct Connect Extender Cards with Test Points Added
test points soldered
onto extender card