manualshive.com logo in svg
background image

WARRANTY

Zetron warrants that all equipment manufactured by or sold under Zetron label is
free from defects in material and workmanship at the time of shipment. For your
convenience, Zetron may purchase and supply items manufactured by others.
This will be disclosed to you. In these cases other warranties may apply. Consult
with Zetron for specific details. Zetron’s warranty extends one year from date of
shipment and covers parts and labor. Buyer must provide written notice to Zetron
within the warranty period of any defect. If the defect is not the result of improper
use, service, maintenance or installation, and if the equipment has not been
otherwise damaged or modified after shipment, Zetron shall either replace or repair
the defective parts or replace the equipment or refund the purchase price at
Zetron’s option, after return of such equipment by buyer to Zetron. Shipment shall
be paid for by the buyer. No credit shall be allowed for work performed by the
buyer. Equipment found to be not defective shall be returned at buyer’s expense
and testing and handling expense shall be borne by the buyer. Out-of-warranty
repairs will be invoiced at the current Zetron hourly rate plus the cost of needed
components.

LIMITATION OF LIABILITY

Zetron makes no representation with respect to the contents of this document
and/or the contents, performance, and function of any accompanying software and
specifically disclaims any warranties, expressed or implied, as to merchantability,
fitness for purpose sold, description, or quality.

Further, Zetron reserves the right to revise this document or the accompanying
software and to make changes in it from time to time without obligation to notify
any person or organization of such revisions or changes.

This document and any accompanying software are provided “as is.” Zetron shall
not under any circumstances be responsible for any indirect, special, incidental, or
consequential damages or losses to the buyer or any third party arising out of or
connected with the buyer’s purchase and use of Zetron’s products or services.

Содержание CellPhone Detector Plus



















Отзывы: