Zetor Proxima CL 100, Руководство оператора

Страница: 103 / 210

Activation of the rear PTO shaft - independent revolutions - common working mode
P18N019
The number of PTO shaft revolutions depends on the number of engine revolutions.
When the tractor is not going with its engine running:
A - When the clutch pedal is pressed, use the gear shift lever to select suitable speed of the rear PTO shaft.
Release the clutch pedal.
B - Set proper display of revolutions on the display of the instrument panel according to selected revolutions
of the rear PTO shaft.
C - When the clutch pedal is pressed, move the gear shift lever of dependent and independent revolutions to
the upper position (a) to shift independent revolutions of the rear PTO shaft. Release the clutch pedal.
D - Press the button on the right pillar of the cabin for at least one second to activate the rear PTO shaft.
The operator must sit on the driver's seat when pressing the button.
E - Rotation of the rear PTO shaft is indicated by displaying the number of revolutions on the display of the
instrument panel.
Press the button on the right column of the cabin for interruption of torque transmission from
the rear PTO shaft.
If the rear PTO shaft is active and the operator leaves the driver's seat for more than five
seconds, an audio signal is generated and the rear PTO shaft is deactivated. Reactivation is
performed when the operator sits on the driver's seat by pressing the button on the right column of
the cabin.
PTO DRIVE OF AGRICULTURAL MACHINES
102