Zetor FORTERRA HSX Series Скачать руководство пользователя страница 65

Страница: 65 / 222

Display - setting of day and night backlight of the display

P18N098

Enter the display settings menu.

a - Use the buttons (C) and (D) to select the item for the day display backlight. Long press the button (B) to

enter the screen for the display backlight setting (b).

b - Use the buttons (C) and (D) to move the slider for changing the intensity of the display backlight. The

change of the backlight in percentage is indicated above the slider (3). 100 percent is maximum backlight

and 0 % is minimum backlight.

Press the button (B) to confirm the changed value of the display backlight and return to the display settings
menu.

Press the button (A) to return to the display settings menu without changing the original value of the display

backlight.

Use the buttons (C) and (D) to select the item (2) and repeat the same procedure as for the item (1).

INSTRUMENT PANEL

Содержание FORTERRA HSX Series































































































































































































































Результаты поиска

Содержание FORTERRA HSX Series

Отзывы:

Zetor FORTERRA HSX Series, Руководство оператора, Страница: 65 / 222

Результаты поиска

Содержание FORTERRA HSX Series

Отзывы: