Zetor FORTERRA 95, Руководство оператора

Страница: 159 / 197

159
MAINTENANCE INSTRUCTIONS
F206 D401 E13
FRONT PTO
The inspection and filling plug of oil (1) is
situated on the front side of the front
PTO case.
The front PTO with the standard turning
direction is equipped with a hollow bolt of
the oil cooler hose instead of the inspec-
tion and filling plug. Perform the check
after removing the hollow bolt.
After unscrewing of the inspection
plug the oil level must reach the
bottom edge of the inspection
opening.
During the oil replacement the oil clean-
ing strainer (2) must be cleaned. The
cleaning strainer is accessible after the
disassembly of the locking ring and re-
moval of the cap.
BRAKE LIQUID REPLENISHMENT
The tank is accessible after the removal
of the right rear side plate of the hood.
Maintain the brake liquid level in the
range of 3/4 of the tank content (max.
level) and 1/2 of the tank content (mini-
mum level).
When handling brake liquid, keep
absolute cleanness. Check the
brake liquid level daily before
starting your work.
CARBON FILTER INSTALLATION IN-
STRUCTIONS
1. Remove the old filter from the air duct
orifice in the place of its mounting.
2. Remove the protective package from
the new filter.
3. Insert the filter into the air duct orifice
in such a way to make the air flow
direction correspond to the flow
direction through the filter in
accordance with the arrow on the
filter. The entering air must first pass
through the white dust filtration layer.
4. Check proper sealing of the filter.
5. Secure the filter.