Zetor 106 41 forterra turbo, Руководство оператора

Страница: 114 / 257

114
HYDRAULIC SYSTEM
F_02_96 F_02_72
DESCRIPTION OF THE FUNCTIONS ASSIGNED TO THE VARIOUS CONTROL
LEVERS
Lever position Function
1 Rear (upper)
position Pressure oil to the quick couplers Nos. ” 2 ”, " 4 ", " 6 "
Quick couplers connected to the discharge :” 1 ”, ” 3 ”, ” 5 ”
2
Middle position Neutral
3 Front (lower)
position
Pressure oil to the quick couplers Nos. " 1 ", " 3 ", " 5 "
Quick couplers connected to the discharge ” 2 ”, ” 4 ”, ” 6 ”
4 Front (outer)
position
With increased effort, it is possible to shift the control levers
from the position (3) forwards to the position (4) called floa-
ting (free) one, where the levers are arrested. The two quick
couplers of each of the section are connected to the dis-
charge in this position.
Single-acting cylinder shall always be connected to the quick couplers:
“
4 “, “ 6 “ at two-section SCV!
“ 2 “, “ 4 “, “ 6 “ at three-section SCV
Double-acting cylinder must be connected to the quick couplers of the same
section (it means
:” 1 - 2 ”; :” 3 - 4 ”; ” 5 - 6 ”)
The first (right) section of SCV is
equipped with hydraulic lock in pressure
positions.
A - At two-section SCV this is a section
of quick-couplers “3“ and “4“.
B - At three-section SCV this is a sec-
tion of quick-couplers “1“ and “2“.
The outlet „4“(A) or “2” (B) in addition, is
fitted with a check valve – to be used for
the connection of machine operating
branch with increased sealing parame-
ters - minimum descent of implements in
the course of transportation, for instan-
ce.
Note: The lever automatically returns
from the position (1) and (3) to the neut-
ral one.