4
■
Re-establish the connection between the headset and the phone
If you want to reconnect the headset to your phone, switch on the headset, connect the phone's
bluetooth menu or press and hold the answer / end key .
You can set your phone to automatically connect to the headset when turning on the headset.
Check the operation manual of your phone for more information.
3. Typical use Handling Calls
To make a call - Use your phone as normal when the headset is connected to the phone.
To answer a call - Press the answer / end key, or use the phone keys.
To end a call - Press the answer / end key, or use the phone keys.
To reject an incoming call - If you get a call, you will not answer, press the answer / end button and
hold for 3 seconds. When you release the button, you will hear a dial tone from the headset. The
call has been rejected.
Redial last number called - If your phone supports redialing with this device, double tap the answer
/ end button to redial the last number dialed.
■
How to adjust the earphone volume
Volume Up / Press to increase the volume while talking on the phone.
Volume Down / Press VOLUME - to adjust the volume while talking on the phone.
■
Switch a call between phone and headset
If during a call , press the answer / end button for 3 seconds , switch off the BHZ306 headset and
the call is transferred to your mobile phone. If you want to transfer the call back to the headset, you
must again press the answer / end key and hold it for 3 seconds until you hear a beep. Then
release the button to transfer the call back to the headset.
■
Using BHZ306 with two mobile phones
It is possible to have two mobile phones simultaneously associated with BHZ306 headset. This
gives you the advantage of only using one headset for both your mobile .
■
Pairing the second mobile phone:
When BHZ306 has connected with the first cell phone, turn off the headset, then press the answer
/ end key and hold it down until the LED indicator flashes blue and red. This indicates that the
headset is now in pairing mode. Go into the other phone's bluetooth menu, search for the headset
and connect with it.
When connected with the other phone, the connection between the headset and the first phone
is interrupted. It is necessary to reconnect with the first phone via the phone's settings so that
BOTH phones associated with BHZ306.
Redial and voice dialing features will only work on the last paired phone
■
Troubleshooting
If you cannot connect the headset with your phone, try the following:
• Ensure that the headset is charged, switched on, paired and connected to your phone.
• Make sure that bluetooth is activated on your phone.
• Ensure that the headset is within 10 meters of the phone and that there are no obstructions
between the headset and the phone, such as walls or other electronic devices.
