background image

The use of safety guidelines

 *

  For your safety, please read these operating instructions carefully before using ZETLIGHT 

      NANO LED Lighting System.

 *

  NEVER LOOK DIRECTLY AT THE LEDS. Light emitted from LEDs may cause eye and/or 

      skin damage not covered by ZETLIGHT. UV and Invisible Radiation (IR) emitted from this 
      product can case permanent damage. Always minimize exposure to eyes and skin.
  

*

  A drip loop must be used with all electrical aquarium devices. A drip loop is a self-made part 

      of the cord hanging below the receptacle. (See Fig. 1)

 *

  If you wrong operation caused personal safety and equipment damage, our company will be 

      no responsible for it.
  

*

  Check the power cord, plug and socket are intact.

 *

  Before your wiring, please read the state and local laws, make sure to use a compliant 

      power adapter.

 * 

To commission a qualified person for the wiring installation.

 * 

To fix the light fixture reliably and steadily.

  

*

  Do not place anything on the product.

 *

  Avoid objects into the product. Keep the slot and ventilation opening clean, they should not 

      be blocked and covered.

 *

  Please do not splash water on it, and do not put it into water.

  

*

  If the light fixture/power supply are damaged, please repair or replace it by professionals.

Hardware assembly & installation

Required tools

Flathead Screwdriver with small tip

1.Attach the Mouthing Bracket to the LED Housing with the Mounting Screws. Use a small 
Flathead
    Screwdriver to fasten and tighten down the Mounting Screws.
2.Attach the Mouthing Bracket and LED Housing to the chosen aquarium panel with Mounting 
Bolts.
    Fasten and tighten down the Mounting Screws by hand.
3

.

Please unplug the battery protection part before you use the remote controller

Getting Started

Thank you for choosing ZETLIGHT NANO series
                as your LED lighting system

1

3

ZETLIGHT

NOTE

If

 

extra

 

Mounting

 

Bolts

 

and

/

or

 

Screws

 

are

 

included

please

 

save

 

as

 

re

placement

 

parts

.

Package content

2

ZETLIGHT

1

2

3

4

5

6

Parts diagram

1

LED

 

Housing

2

.

Power

 

Source

3

.

Mounting

 

Bracket

4

Mounting

 

Bolts

 

x

 

2

5

Mounting

 

Screws

 

x2

   

Infrared remote

   

 controller 

6

.

Parts list

Please check the content in the package

Отзывы: