background image

 WARNING/AVERTISSEMENT

RISK OF ELECTRIC SHOCK

Turn power off before inspection, installation or removal.

Properly ground electrical enclosure.

RISK OF FIRE

Follow all NEC and local codes.

Use only UL or IEC approved wire for input/output

connections. Minimum size 18 AWG (0.82mm

2

).

RISQUES DE DÉCHARGES ÉLECTRIQUES

•  

Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.

Assurez-vous de correctement mettre à la terre le boîtier d’alimentation

électrique.

RISQUES D’INCENDIE

Respectez tous les codes NEC et codes locaux.

N’utilisez que des fils approuvés par UL ou IEC pour les entrées/sorties de

connexion. Taille minimum 18 AWG (0.82mm

2

).

Lumination

TM

 LED Luminaires

Suspended LED Fixture

(Series EP

2

4)

Features

Long life (50,000 hour rated life)

5 year warranty

Dry location rated

BEFORE YOU BEGIN

Read these instructions completely and carefully.

Save These Instructions

Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

Each luminaire is to be used with remote driver kit, model no. EP-DKIT400. 

Wiring to be performed by qualified electrician only.

Installation Guide

Summary of Contents for Lumination EP24 Series






Reviews: