Zeta ZiFiSense WDZ1ZT92, Инструкция по эксплуатации

Страница: 14 / 16

WDZ3ZT92
14
7.2. Support function

Report/Query version number: After the power is turned on, the
version number information is reported by default. After that, the
query can be sent.

Status report: Reports the heartbeat/alarm/de-alarm status, and
reports a heartbeat status after power-on.

Set/Query the alarm report period: The time when the sensor detects
the periodic report when it is flooded (range: 0-255 minutes, default
value: 0, 0 means the alarm is only reported once, no periodic report is
required.)

Set/Query Report Heartbeat Period: You can set or query the currently
set heartbeat reporting period by minute. (Range: 1~65535 min,
default: 24*60 min)

Set/Query Alarm Enable: Enable ON means that the alarm status needs
to be reported when the threshold is exceeded. Enable Off means no
alarm is required even if the threshold is exceeded.

Set/Query Acquisition Period: The period during which the device
collects sensor information (range: 0-65535 seconds, when the value is
0, it means real-time acquisition, default value: 5s).

Query device status: Actively query the current status of the device,
including whether it is flooded, and alarm enable information.
8. Common faults and handling

Ensure ZETA signal coverage

Ensure that the device is powered on, and the ZETA network device
management platform can observe that the ZETA module is on line

Check the battery usage of the device. When the battery is low, replace
the battery in time.