Zeta ZiFiSense WDZ1ZT92, Инструкция по эксплуатации

Страница: 12 / 16

WDZ3ZT92
12
6.4. Installation of sense cable
If it is the model of WDZ3ZT, it is necessary to standardize the installation
of the sense cable.
6.4.1.Auxiliary material
Material No.
Wire nail few
Hammer 1
Screwdriver 1
6.4.2.installation steps

Plan the installation and routing position of the sense cable before
installation.

The two ends of the sense cable have their own interface plugs, and the
plugs can be connected with the plugs connected to the sensors.

The part of the sense cable is fixedly installed according to the planned
line, and it is neat and tidy.
Note:

Any one of the sense cable will trigger an alarm.

The two black wires of the cable are conductive adhesives. If the
resistance between the black wires is less than 50MΩ, the alarm will be
triggered regardless of whether the wire is stripped.

During the installation or post-maintenance process, if you need to
re-wire the wiring.

Avoid the two black wires to be contact too close.