Zeta ZD-SI-601/ZD-SO-601, Руководство пользователя

Страница: 9 / 26

8
2 Install Mounting Plate
Fit the mounting plate to the ceiling or wall
using the screws provided.
If the alarm is to be mounted on a wall,
ensure the mounting plate is aligned correctly.
The mounting plate has an arrow moulded
into the plastic. This indicates the orientation in
which the mounting plate should be installed.
This ensures that when the alarm is fitted the
vents will be central and facing upwards.
2 Install Mounting Plate
3 Install 9V Battery
IMPORTANT:
Before installing your
smoke alarm the battery must be removed
from the alarm and the protective wrapper
on the battery should be removed. The
battery should then be refitted. The battery
compartment has been designed to prevent
the battery being inserted incorrectly.
CAUTION:
The horn is designed to
be loud to wake you in an emergency.
Avoid placing your ear close to the alarm
when installing battery.
Insert the battery that was provided with
the alarm making sure that the positive and
negative connections are in the correct
position, see diagram. The red LED on the
front should now flash once every 40 seconds
to show the alarm is active.
3 Install 9V Battery
Ensure wrapper is removed