Zeta ZD-SI-601/ZD-SO-601, Руководство пользователя

Страница: 11 / 26

10
OPERATION
Normal condition
The red LED on the front should flash once
every 40 seconds to show the alarm is
active.
Low Battery Condition
IMPORTANT:
Your smoke alarm
requires a battery with a sufficient
capacity of power to operate correctly, this
must also be correctly installed.
Should your Zeta smoke alarm enter a low
battery condition, the unit will emit an audible
‘chirp’ once every 40 seconds. When
this occurs you must replace the battery
immediately. Your Zeta smoke alarm will
continue to warn of this low battery condition
for at least 7 days, however, failure to change
the battery after this time would mean your
smoke alarm has insufficient power to alert
you in a real fire situation.
BATTERY REPLACEMENT
IMPORTANT:
Only the following
batteries can be used for replacement.
Use of a battery other than those
recommended below may have a detrimental
effect on the detector’s operation. Use of
a lithium (long-life) battery could provide
power for 10 years under normal operating
conditions, meaning there is no need for an
annual battery change.
Carbon-Zinc type:
Eveready Energizer 1222; Gold Peak
1604S (UL).
Alkaline Type
Energizer 522; Duracell MN1604; Duracell
9V Ultra; Energizer 9V Ultra+; Gold Peak
1604A.
Lithium (long life) type
Ultralife U9VL.
a
Remove the alarm from its mounting plate
by turning anti-clockwise