ADDRESSABLE
FIRE ALARM PANEL
ci
i
m
p
l
i
S
y
t
Micro
INSTRUCTION MANUAL: 32 Device,4 Zone Addressable Fire Alarm Panel
Approved Document No: GLT.MAN-129
PAGE 11
Issue : 1.0 Author: NRPJ Date: 11/04/2008
11. To skip many addresses, press 1 (for loop 1).
The Panel will then prompt for the address. Type the
address and press enter. The panel will now jump to this
address.
The sounder symbol in the top right hand corner shows that this
detector is fitted to sounder base. The panel will send the “activate
base sounder” command to this address in the event of an alarm.
12. When all devices have been entered, press Cancel to exit the message editing screen, and cancel again to exit
the menu and to return to normal.
The panel is now configured and ready for operation.
SETTING TIME AND DATE
To set the time & date, enter Configuration Menu 2 and select Configure System (6). The System Menu is now
displayed. Select option 1 to set time & date. Enter the Day, Month, Year, Hour & Minutes as prompted, and press
enter to save, or Cancel at any time to exit.
SETTING A CUSTOM BANNER
On the Simplicity Micro, the default screen shows Simplicity Micro Fire alarm Panel . But this SYSTem name can
be changed to any 2 lines of 20 Characters that are required. In the System Menu (the one with set clock etc), type
7978
(SYST). Then type the first line of text, followed by enter, then the second line of text, followed by enter.
This message will now be the screen when the panel is running normally.
Enter Loop Address
Loop: 1
Address: 025
