SIMPLICITY PLUS USER MANUAL, MAINTENANCE GUIDE & LOG BOOK
Software Versions: PANEL r7255 & LOOP r7152
Approved Document No: GLT.MAN-108
PAGE 23
Issue 3.09 Author: NRPJ Date: 25/5/2017
Design Certificate
(Page 1 of 2)
Certificate of DESIGN for the Simplicity Plus Fire Alarm System installed at:
ADDRESS:
I/we being the competent person(s) responsible (as indicated by my/our signatures below) for the design of
the fire alarm system, particulars of which are set out below, CERTIFY that the said design for which I/we
have been responsible complies to the best of my/our knowledge and belief with the recommendations of
section 2 of BS 5839-1 for the system category described below, except for the variations, if any, stated in
this certificate
Name (
Block Letters
):
Position:
Signature:
Date:
For & on behalf of:
Address
The extent of liability of the signatory is limited to the system described below.
System Category (see BS 5839-1):
Variations from the recommendations of BS 5839-1
Extent of system covered by this certificate:
Brief description of areas protected (not applicable for Category M, L1 or P1 systems):
