Zesto Audio 2015
|
P a g e
8
Active Components
Matched sextet set of six (6) KT88’s vacuum tubes
Two (2) Gold pin ECC82 (12AU7) vacuum tubes
High quality gold plated ceramic sockets
Other Features
Each unit is made by hand
50 hour factory burn in on all circuits and vacuum tubes
Dimensions 17" W X 20" D X 10" H
Weight 59 lbs. (26.8 Kg)
16 and 14 gauge Zinc plated steel enclosure
Two year limited warranty
Six months warranty on Vacuum Tubes
Proper Care of your EROS 300 Power Amp
Very Important Read First
The simple rule to remember is to
“turn on your preamp first before turning on your power amp and turn off the
power amp before turning off the preamp.”
Not doing so may create a very loud noise that could damage your speakers or other equipment.
It is customary for vacuum tube equipment, when it is first turned on, while the unit is powering up, to have a brief initial
“hum” coming from the unit, not from the speakers.
It is very important that all of your audio equipment is
turned off
or unplugged from the main power before attempting to
install this unit.
The unit is ready to listen to within a few minutes after powering up, however for best performance allow at least 30
minutes of warm up.
It is
not recommended
to drive the EROS 300 directly from a DAC or to use a passive volume control. The EROS 300 is
designed to be driven by a powered preamp.
Burn-in
Like all high end audio equipment, this Vacuum Tube Amplifier can take 200 or more hours to break in. For circuit testing
and quality assurance, Zesto Audio ships all the EROS 300 Amps with at least 50 hours of factory burn-in.
