English - 2
© 2021 ZES - All rights reserved
IB v3.0.0 2021
SAFETY INFORMATION
CAUTION
RISK OF ELECTRIC SHOCK:
CAUTION:
VESTEL ELECTRIC VEHICLE CHARGER DEVICE SHALL BE MOUNTED BY A LICENSED OR
AN EXPERIENCED ELECTRICIAN AS PER ANY REGIONAL OR NATIONAL ELECTRIC REGULATIONS AND
STANDARDS IN EFFECT.
CAUTION
AC grid connection and load planning of the electric vehicle charging device
shall be reviewed and approved by authorities as specified by the regional
or national electric regulations and standards in effect. For multiple electric
vehicle charger installations the load plan shall be established accordingly. The manufacturer shall
not be held liable directly or indirectly for any reason whatsoever in the event
of damages and risks that are borne of errors due to AC grid supply connection or load planning.
IMPORTANT - Please read these instructions fully before installing or operating
SAFETY WARNINGS
•
Keep this manual in a safe place. These safety and operating instructions must be kept in a
safe place for future reference.
•
Check that the voltage marked on the rating label and do not use charging station without
appropriate mains voltage.
•
Do not continue to operate the unit if you are in any doubt about it working normally, or if it
is damaged in any way - switch off the mains supply circuit breakers (MCCB and RCCB) in
upstream distribution panel. Consult your local dealer.
•
The ambient temperature range during charging should be between –25 °C and +50 °C (without
direct sunlight) and at a relative humidity of between 5 % and 95 %. Use the charging station
only within these specified operating parameters.
•
The device location should be selected to avoid excessive heating of the charging station. High
operating temperature caused by direct sunlight or heating sources, may cause reduction of
charging current or temporary interruption of charging process.
•
The charging station is intended for outdoor and indoor use. It can also be used in public places.
•
To reduce the risk of fire, electric shock or product damage, do not expose this unit to severe
rain, snow, electrical storm or other severe weathers. Moreover, the charging station shall
not be exposed to spilled or splashed liquids.
•
Do not touch end terminals, electric vehicle connector and other hazardous live parts of the
charging station with sharp metallic objects.
•
Avoid exposure to heat sources and place the unit away from flammable, explosive, harsh, or
combustible materials, chemicals, or vapors.
•
Risk of Explosion. This equipment has internal arcing or sparking parts which should not be
exposed to flammable vapors. It should not be located in a recessed area or below floor level.
•
This device is intended only for charging vehicles not requiring ventilation during charging.
•
To prevent risk of explosion and electric shock, ensure that the specified Circuit Breaker and
RCD are connected to building grid.