English - 11
IB v3.0.0 2021
© 2021 ZES - All rights reserved
Important note:
If the cover is not closed properly, charging section will not be starting. When
the cover is closed down, the cover will be locked automatically so that you will be able to see
the charging section to be started from the display. Details are explained in Charging Scenarios
section.
These steps are also shown from the display accordingly. If the cover is not closed down properly,
the screen will remain in the same page to close the cover, as below:
3 - CHARGING SCENARIOS
•
For AC Type2 outlets to start charging section;
1. you may first select the socket you want to use from the touchscreen of the charging station
and tap your authorised RFID card to the reader and then plug your charging cable to that
selected socket of the charger within 60 seconds of timeout, or
2. you may first plug your charging cable to the available socket of the charging station first,
then select the socket you want to use from the touchscreen of the charging station and tap
your authorised RFID card to the reader.
•
For schuko outlets to start charging section; you need to first select the socket you want to
use from the touchscreen of the charging station and tap your authorised RFID card to the
reader. After the schuko cover unlocks, then lift up the cover and you may be able to connect
your plug to the schuko socket.