Zero FXS 2019, Руководство пользователя

Страница: 68 / 158

Power Pack and Charging
5.6
Charging the Power Pack
WARNING! Always charge the Zero power pack in a
location that is well-ventilated and away from combustible
materials. If charging your Zero Motorcycle outdoors, avoid
charging in the rain.
WARNING! Only charge the Zero power pack with the
Zero charger or approved Zero accessory chargers. Using
unapproved chargers or accessories may lead to cell
damage or battery failure.
If the power pack’s internal temperature is below 32°F
(0°C) or above 122°F (50°C), it will not accept a charge
until the temperature is between these limits. If the power
pack has recently been rapidly discharged from aggressive
riding, it may internally be above 122°F (50°C), even if the
ambient temperature is lower.
If you experience a power pack that will not take a charge,
you should ensure the internal temperature is below 122°F
(50°C). If the power pack has recently been operating near
maximum output and/or in hot conditions it may not take a
charge, the power pack should cool off and begin taking a
charge in around 30 minutes or less.
The maximum charging temperature cutoff is a power pack
longevity feature. Charging at higher temperatures can
shorten the life of the power pack.
Note: Frequent top off charging is good for the power
pack’s life span, so do not hesitate to charge frequently.
To charge using the standard on-board charging
equipment:
1. Plug the supplied power cord (A) into the on-board
charger connector. Always keep the power cord with
the motorcycle.
2. Always connect the charger to a GROUNDED outlet.
When using an extension cord, avoid excessive voltage
drops by using a grounded, 3-wire, 12-AWG cord no
longer than 25 ft (7.6 m). The charger can be used on
120 V AC or 240 V AC current. The voltage does not
Zero Owner's Manual (FX and FXS).book Page 6 Tuesday, October 23, 2018 1:54 PM