Zero FX 2018 Скачать руководство пользователя

Страница: 86 / 156

General Maintenance

6.14

Suspension

Front

•

For maintenance, see Maintenance Schedule on

page 6.2

•

To adjust the fork, see Suspension Adjustment on

page 4.9

Rear
WARNING!

The shock absorber assembly contains highly

pressurized gas.

•

Do not attempt to tamper with or open the cylinder or
shock.

•

Do not subject the shock to high temperature or open
flame.

WARNING

! Doing either of the above actions can cause

the cylinder or shock to explode causing personal injury or
death.

For maintenance, see Maintenance Schedule on

page 6.2

To adjust the fork, see Suspension Adjustment on

page 4.9

Wheels And Tires

Inspect both wheels for the following:

•

Bent, loose, or missing spokes.

•

Bent or cracked rims.

•

Impact marks on the rims.

Inspect both tires for the following:

•

Cuts, cracks, splits, or missing tread lugs in the tread or
sidewall area.

•

Bumps or bulges within the tire body.

•

Uneven tire tread wear. Wear on one side of the tire
tread or flat spots in the tire tread indicate a problem
with the tire or motorcycle.

•

Exposed tire thread or cords.

If either of the wheels or tires are found to have any of the
above conditions, replace the wheel and tire immediately.

Zero Owner's Manual (FX and FXS).book Page 14 Monday, September 11, 2017 10:13 AM

Содержание FX 2018





























































































































































Результаты поиска

Содержание FX 2018

Отзывы:

Похожие инструкции для FX 2018

Бренды по названию

Популярные бренды

Zero FX 2018, Руководство пользователя

Результаты поиска

Содержание FX 2018

Отзывы:

Похожие инструкции для FX 2018

Бренды по названию

Популярные бренды