Zero DS 2012, Руководство пользователя

Страница: 51 / 120

4-14
Stopping
1. With the throttle in the closed position press the
motor stop switch to the OFF position. This switch
can also be used in an emergency to shut the
motor off.
2. Turn the key switch to the OFF position and
remove the key. To prevent theft, the key should
be removed anytime the motorcycle is left
unattended.
3. Be sure to charge the power pack after each ride.
See Charging The Power Pack on page 4-10.
Operating Your Motorcycle
Starting
1. Turn the key switch to the ON position.
2. Verify that the charge indicator reads fully charged.
3. Press the motor stop switch to the ON position.
4. With the kickstand up, twist the throttle toward you
(counter-clockwise) to increase speed. When the
throttle is twisted away from you (clockwise), the
speed will decrease.
Braking
On the right handlebar is the hand operated brake
lever. The brake lever controls the front brake when
the lever is squeezed. On the right lower side, next to
the foot peg, is the foot operated brake pedal. This
pedal controls the rear brake. When braking, the
throttle should be in the closed position.
CAUTION: If you apply the front or rear brake hard
enough, it is possible to lock the wheels. This could
cause you to lose control of the motorcycle. We
suggest progressive use of the brakes to bring the
Zero motorcycle to a complete stop without locking
the wheels. Your Zero motorcycle is a light weight
performance product and therefore practice is
recommended to safely perfect emergency stops.