ZERO-X ZXRVN, Руководство пользователя

Страница: 18 / 24

16
Flipping and Stunts
The Raven drone can perform 360 flips in any direction by pushing the Flip Button
(11), and then pushing the Right Thumbstick (Pitch / Roll) (3) in the direction you
want to flip the drone.
Camera
The camera on the Raven drone is controlled via the Video (6) and Photo (5) buttons
on the remote control to the left of the LCD screen.
When you are intending to use the camera, please ensure that you have inserted a
Micro SD card (not included) into the Micro SD card slot in the Raven drone.
The light on the camera will shine green when a Micro SD Card is detected,
and it is ready to record video or take still photos.
If the light on the camera does not activate, try re-inserting the Micro SD Card and
restarting the Raven drone.
Shooting Video
To start recording video, push the Video Button (6) on the remote control.
The light on the camera will start flashing red indicating that recording is in progress.
To stop recording push the Video Button (6) again and the light on the camera will
return to shining green. Ensure you have stopped recording before removing the
Micro SD Card, or turning the power off on your Raven drone.
Shooting Photos
To take a photo with your Raven drone press the Photo Button (5) on the remote
control. The light on the camera will flash red once and then return to green.
Tilt the Camera
The Camera can be angled up and down while on the fly to capture either a bird’s
eye view of forward facing footage.
To tilt the camera up and down use the Camera Tilt Controls on the Remote
Control (15).
To save power the Camera Tilt function deactivates when the Raven drone’s
battery is low. To reactivate these controls, charge the drone’s battery and
re-launch the Raven drone.
Please ensure that you have a 2
metre clearance below, and in all
directions around the drone before
attempting to flip as this manoeuvre
requires considerable space.