ZERO-X Maverick, Руководство пользователя

Страница: 14 / 32

14.
5.1 CALIBRATING THE MAVERICK
1. Ensure the Drone and camera batteries are fully charged and installed
and the controller batteries are of an adequate level and conduct
a complete check of your surroundings making sure that your flight
area is free of any hazards.
2. Hold the button on the controller for 2 seconds until it switches on.
3. Switch the power switch on the underside of the Maverick on and
place on a level section of ground free of any obstacles.
4. At this point if you intend to film your flight turn on the camera by
holding the button on the front face of the camera for 1 second and
when the camera powers up press the OK button on the top of the
camera and recording will start.
5. Move the GPS switch on the top right of the controller to the back
position turning it off.