ZERO-X Maverick, Руководство пользователя

Страница: 11 / 32

11.
2. Make sure that the blades are secure and the hexagonal sockets on
the rotor blades.
3. Slot the small white locking caps onto the motor stems on top of the
rotor blades with the open larger side of the caps facing upward.
4. At this point make sure the Maverick is on a clear level surface.
5. Line the ridges in the top of the locking caps up with the holes in the
motor stems and insert the included metal pins through the motor
stems via the larger ridge in the locking cap. The pins should rest
halfway through the motor stems.
Do not lift the drone beyond this point until the metal pins are locked
in place to avoid the metal pins coming lose.
6. One at a time, gently lift the white locking caps until the pin is
pressed against the floor of the locking cap and twist the locking cap
so the pin passes underneath the locking lip of the locking cap. The
pin will click into position when the cap is turned 90° and the pin is
halfway under the caps locking lip.
7. Finally press the protective stem tops onto the motor stems so that
the locking system is covered.
The protective stem tops will not touch the rotor blades.