ZERO-X Maverick, Руководство пользователя

Страница: 10 / 32

10.
3.4 SECURING THE MAVERICKS LEGS
There are 4 legs included with the Maverick, one of which contains an
antenna which is necessary to be connected before flying.
To connect the legs to the maverick please follow the instructions below.
1. Find the leg that contains the antenna and post the antenna cable
from the drone through the hole in the top of the leg.
2. Connect the antenna to the antenna cable being careful to make sure
that the pins align.
3. Place the legs peg into the socket on the drone and secure with 2 of
the provided screws.
4. Place the remaining legs in position on the underside of the drone by
inserting the legs pegs into the sockets and securing each leg with
two of the included screws,
3.5 SECURING THE MAVERICKS BLADES
The blades on the maverick are secured by a pin and cap locking system
that keep the blades in position.
To install the Mavericks rotor blades please follow the instructions below.
1. Slot the rotor blades onto the correct motor stems matching the ‘A’
clockwise motors with the rotor blades marked ‘A’ and the ‘B’ counter
clockwise motors with the rotor blades marked ‘B’. Make sure that the
letters A and B on the rotor blades are facing upward.
B