08.
3.0
SETTING UP YOUR ZERO-X HYDRA
3.1
CHARGING THE BATTERY
PLEASE NOTE: YOUR ZERO-X DRONE COMES WITH A CERTIFIED
ZERO-X USB AC CHARGING ADAPTER FOR 240v CHARGING OF
YOUR DRONE BATTERY. USE OF A NON ZERO-X CERTIFIED USB
AC CHARGING ADAPTER WILL VOID YOUR WARRANTY AND MAY
DAMAGE BOTH YOUR BATTERY AND DRONE.
Fully unwind the included USB charging cable and plug the USB end into
the included Zero-X Certified USB AC charging adapter. When connected
to a charging source the LED light in the charger will flash red. Connect
the drone battery to the charging cable and the light will shine green
indicating charging is in process. The LED on the USB charging cable will
begin to flash red again once charging is complete.
To keep the battery life as long as possible avoid removing the battery
from the charging cable before charging is complete. If you have just
finished flying your Hydra drone, please allow the battery to cool down for
at least 30 minutes before recharging.
• When the Hydra battery has finished charging it is advised that the
battery is removed from the charger as soon as possible. Overcharging
will damage the battery and effect the flight time.
• The Hydra battery can take up to 90 minutes to fully charge. If the
battery has been on charge for any longer than 2 hours and the indicator
on the charging cable is not showing that the battery is charged, please
remove the battery from the charger.
• When connecting the USB cable with the battery, make sure to follow
the guides on the battery connector as these are designed to only
be inserted in one direction. Forcing the connection in the incorrect
direction, may cause damage to the battery and charging cable.
• When flying the Hydra, low battery will be indicated when the remote
control starts beeping and the lights on the Hydra start flashing.
