Zero Motorcycles S 2010, Руководство пользователя

Страница: 77 / 118

5-16
6. Install the headlamp bulb into the lens.
7. Install the headlamp spring clip.
8. Install the headlamp bulb cover; ensure that the
arrow is pointing up.
9. Connect both connectors and install the headlamp
screws.
Turn Signal Bulb Replacement
1. Remove the turn signal lens screw (A) and
remove the lens.
2. Push in on the bulb, turn the bulb counter-
clockwise, and then pull the bulb out.
3. Insert the new bulb into the socket, push in and
turn clockwise until it stops.
4. Install the lens and screw; tighten the screw. Do
not over-tighten the screw otherwise the lens may
break.
A
Stop/Tail Lamp Bulb Replacement
1. Remove the stop/tail lamp lens screws (A) and
remove the lens.