Zero Motorcycles S 2010, Руководство пользователя

Страница: 45 / 118

4-4
General Operation
Pre-Ride Inspection
Before operating the Zero S/DS motorcycle, check the
following to make sure the motorcycle is secure and
intact:
•
Power Pack
Make sure the onboard energy gauge is
indicating a charged power pack. If the
energy gauge reads below 6 bars (1/2), we
suggest you recharge before use. Always keep
the charger cord with the motorcycle.
•
Drive Chain
Check chain slack and condition. Adjust and
lubricate if necessary. The drive chain must be
cleaned and lubricated at the intervals specified
in the maintenance schedule; otherwise it will
quickly wear out, especially when riding in dusty
or wet areas. See Chain on page 5-10.
•
Brakes
Squeeze the brake lever and press the brake
pedal individually while pushing the motorcycle to
see if it rolls. You should be able to lock-up the
wheels completely by applying the brakes.
•
Throttle
With the key switch in the OFF position, apply the
throttle and release to verify that the throttle is
smooth and returns correctly.
•
Tires
Check both tires for condition and tread depth.
Check cold tire pressure frequently. Check for
damage and alignment. Maintain correct tire
pressure as specified on page 5-9. Replace the
tires when the tread height is 2 mm (0.08 in) or
less.
CAUTION: Under-inflation is the most common cause
of tire failure and may result in severe tire cracking,
tread separation, “blowout,” or unexpected loss of
motorcycle control causing personal injury and
possible death.
•
Electrical System
Check for correct function of the headlamp, turn
signals, and the stop/tail lamps.