Zero Motorcycles S 2010, Руководство пользователя

Страница: 53 / 118

4-12
A
4. Always connect the charger to a GROUNDED
outlet. When using an extension cord, avoid
excessive voltage drops by using a grounded, 3-
wire, 12-AWG cord no longer than 7.6 m (25 ft).
The charger can be used on 110 V AC or
220 V AC current. The voltage does not change
the amount of time that the motorcycle takes to
charge.
Charging The Power Pack
1. When the motorcycle’s energy gauge is on the
third or fourth bar when not under load, the
power pack needs to be charged. Frequent top
off charging is good for the power pack’s life
span, so do not hesitate to charge frequently.
2. Ensure that the key switch is in the OFF
position.
3. Plug the supplied power cord (A) into the on-
board charger connector. Always keep the power
cord with the motorcycle.
WARNING: Charge the Zero power pack with the Zero
charger. It is possible for lithium ion cells to overheat
and burst. It is recommended to charge in a location
that is away from combustible materials and in a well
ventilated area. Avoid outdoor charging of your Zero
motorcycle in the rain.