manualshive.com logo in svg

Zero Motorcycles DS 2010, Руководство пользователя, Страница: 66 / 118

Поделиться
Скачать
Zero Motorcycles DS 2010 Скачать руководство пользователя страница 66

5-5

A

See Bolt Torque Table on page 5-2.

Power Pack

WARNING: 

You must leave your motorcycle on the

charger if you expect it to sit in storage or unused for
over 7 days.

The power pack must be charged within 24 hours if
fully discharged, and charged within 60 days if stored
fully charged.

1. The power pack is a lithium ion power system.

While it does require charging, it does not require
maintenance.

2. The power pack should be kept away from

excessive heat. The lithium ion cells should not
get above 71°C (160°F). Do not store in a hot car
or trailer, or leave the power pack in direct
sunlight.

3. Only an authorized service agent is qualified to

have access to and troubleshoot the power pack.

4. Dispose of the power pack according to your state

and local laws. It is encouraged that the power
pack be recycled rather than disposed of in
landfills. Locate a recycling center in your area. If
one cannot be found, contact Zero at
[email protected].

Zero recommends you plug in your Zero motorcycle
after 7 days, even if fully charged. Please leave your
Zero motorcycle plugged in whenever possible.

Содержание DS 2010























































































































Отзывы:

Нет отзывов