Zero Motorcycles DS 2010, Руководство пользователя

Страница: 33 / 118

3-4
A. Headlamp
•
For headlamp operation, see Handlebar
Controls on page 3-10.
•
For headlamp bulb replacement, see
Headlamp Bulb Replacement on page 5-14.
•
For headlamp alignment, see Headlamp
Alignment on page 5-13.
B. Main Power Cut-Off
For description and operation, see page 4-6.
C. Stop/Tail Lamp
For stop/tail lamp bulb replacement, see Stop/Tail
Lamp Bulb Replacement on pages 5-16 and
5-17.
D, E. Turn Signals
•
For turn signal operation, see Handlebar
Controls on page 3-10.
•
For turn signal bulb replacement, see Turn
Signal Bulb Replacement on page 5-16.
F. AC Charger Power Connection
For description and operation, see Charging The
Power Pack on page 4-12.
G. On-Board Battery Charger
For description and operation, see Battery Charger
on pages 4-9 and 4-10.
H. Kickstand Switch
This switch is a safety feature that prevents motor
operation when the kickstand is down. If the
kickstand were down when riding it could contact
the ground causing you to lose control of the
motorcycle and cause personal injury.
WARNING : Park only on a flat firm surface otherwise
the motorcycle could fall over causing damage.
I. Kickstand
The kickstand swings out from the side and
supports the motorcycle when parked. The key
switch should be in the OFF position when
parked.