Zero Motorcycles DS 2010, Руководство пользователя

Страница: 60 / 118

4-19
•
Spring Pre-load Adjustment
1. Clean any dirt or debris from the
threads of the shock.
2. Using a spanner wrench loosen the
lock nut (A).
3. For measurements less than 90 mm (3.5 in),
decrease the pre-load on the spring by
turning the spring nut (B) counter-clockwise
on the shock. If more than 100 mm (4.0 in),
increase the pre-load on the spring by
turning the spring nut (B) clockwise on the
shock.
4. Recheck the sag. If the sag is correct,
tighten the lock nut (A).
•
Rebound Adjustment - The rebound adjuster knob
(C) is at the bottom of the shock. It has 8 stages
of adjustment. Printed on the knob is S-F,
meaning Slow and Fast. The rebound adjuster
knob controls how slow or fast the shock returns
to its extended position after being compressed.
Turning the knob clockwise, or S direction, is
good for big impacts.
C
B
A
Turning the knob counter-clockwise, or F direction, is
good for smaller and more frequent impacts.