Zero Appliances GEV60, Установка, Обслуживание и Пользователь

Страница: 6 / 12

Page 5
8. To terminate the gas operation turn off the shut-off valve on the gas bottle or
gas installation.
USERS NOTE:
The gas safety valve knob (A) should never be depressed for periods
longer than 15 seconds with the burner unlit as this can cause a potentially dangerous build-
up of unburnt gas. If the burner does not ignite, allow sufficient time for any unburnt gas to
disperse, and then repeat the ignition steps.
TO START 12V DC OPERATION
1. Make sure that the gas supply to the appliance is turned off.
2. Make sure that the electric (230V) supply to the appliance is turned off.
3. Connect the 12V Battery (+) red cable to the red banana socket located
on the back of the appliance.
4. Connect the 12V Battery (-) black cable to the black banana socket
located on the back of the appliance.
(+) Red banana socket
(-) Black banana socket
Ignitor
Flame indicator
Green = Burner is lit
Red = Burner is not lit
230V Thermostat.
Clockwise = colder. Anti-
clockwise = warmer
FIGURE A