background image

Area Control

Each dimmer channel in the network is 
assigned to an area. 

Initially, or after a Reset operation, all
channels are assigned to area 1.

This option allows the user to assign
dimmer channels to any of the 10
areas, or to assign all channels to a
specificed area.

Select the 

Area Control

 option from the 

Dimmer Control

 menu options:

< Area Control >
                

Press the ENT key to enter the Area
Control sub-menu. 

The following menu options are
available:

Set Chan Area

Set All Chans Area

Get Area Chans

Use the cursor keys to select the
required menu option.

Press the ENT key to enter the
corresponding sub-menu.

Set Channel Area

This option allows the user to assign
an area to individual master channels.

Select the 

Set Chan Area 

option from

the menu:

<Set Chan Area >
                

Press the ENT key. The LCD shows:

Channel :   1   
Area    :   1

A cursor is shown in the 

Channel

 field.

The channel number defaults to 1.

When the cursor is displayed in the

Channel

 field:

Keypad

 - Enter the channel number

using the numeric keys then press the
ENT key. The cursor moves to the

Area

 field.

Cursor Keys

 - Use the cursor keys to

select the channel number. As the
channel number changes, the
corresponding area is shown in the
Area field. Press the ENT key. The
cursor moves to the 

Area

 field.

When the cursor is displayed in the

Area

 field:

Keypad

 - Enter the required area

number (1 - 10) using the numeric keys 
then press the ENT key.

Cursor Keys

 - Use the cursor keys to

select the area number, then press the
ENT key. 

The area is assigned to the master
channel and the cursor returns to the

Channel

 field. 

Pressing the ESC key at any point on
this screen will return the screen to the

Set Chan Area

 screen.

Set All Channels to Area

This option allows the user to assign
an area to all the master channels.

Select the 

Set All Chans Area 

option

from the menu:

<Set All Chans >
      Area

Press the ENT key. The LCD shows:

  All Channels  
Area    :   1

A cursor is displayed in the 

Area

 field

which defaults to Area 1.

Use the numeric or cursor keys to
enter the required area number, then
press the ENT key.

The LCD shows the following for 3
seconds before returning to the Set All
Chans Area screen:

  All Channels  
     Saved

Pressing the ESC key on the above
screen will return to the Set All Chans
Area screen, losing any changes.

Get Area Channels

This option is used to interrogate the
channels in the network to determine
which area they are assigned to.

Select the 

Get Area Chans 

option from 

the menu:

<Get Area Chans>
      

Press the ENT key. The LCD shows:

Press ENT to get
Areas from Dimm.

Press the ENT key. The LCD shows:

Collecting Area 
Channel Data xx 

After all the channels have been
interrogated, the LCD shows the
following for 3 seconds before
returning to the 

Get Area Chans

screen.

Get Area Channel
    Complete

Chilli Master Controller 73-861-00 Issue 3

3 - 13 

User Interface

Содержание Chilli Master



































Отзывы: