background image

Set All Channels

This option allows the user to set a
manual control level for all the master
channels in a single operation.

Select the 

Set All Chans

 option from

the menu:

<Set All Chans >
                

Press the ENT key. The LCD changes
to the following:

  All Channels  
   Level:  0 

The cursor appears in the 

Level

 field.

Keypad

 - Enter the required channel

level (0 - 100) using the numeric keys
and then press the ENT key. The
outputs of all dimmer channels
matches the level entered.

Cursor Keys

 - Use the cursor keys to

adjust the channel level as required.
As the value in the 

Level

 field changes, 

the output of all the master channels
will change.

Press the ESC key to return to the 

Set All Chans

 screen.

Set Area Channels

This option allows the user to set up a
manual control level for each of the
master channels in a specified area.

Select the 

Set Area Chans 

option from

the menu:

<Set Area Chans>
                

Press the ENT key. The LCD shows:

   Area:    xx  
  Level:   xxx  

A cursor is shown in the 

Area

 field. 

The area number defaults to 1.

When the cursor is displayed in the

Area 

field:

Keypad

 - Enter the area number using 

the numeric keys. Press the ENT key.
The cursor moves to the 

Level

 field.

Cursor Keys

 - Use the cursor keys to

select the area number. As the area
number changes, the corresponding
manual control level is shown in the

Level

 field. Press the ENT key. The

cursor moves to the 

Level

 field

When the cursor is displayed in the

Level

 field:

Keypad

 - Enter the required channel

level (0 - 100) using the numeric keys
then press the ENT key.

Cursor Keys

 - Use the cursor keys to

adjust the level. Press the ENT key. 

The output of the master channels
matches the level entered, and the
cursor returns to the 

Area

 field. 

The # key can also be used to toggle
the manual control level between 0%
and 100% - see notes.

Pressing the ESC key at any point on
this screen will return the screen to the

Set Area Chans

 screen.

Notes

Using the # Key 

The # key can be used as a quick method of

turning the master channels to full (100%)

or off (0%) as follows:

When the cursor is in the Channel or Area

field, the # key acts as a channel level

toggle.  The first push will take the level to

100% (regardless of it’s current level), the

second push will take it 0% etc. The Level

field shows the current value (0% or 100%), 

but the cursor remains in the same field.

When the cursor is in the Level  field, the #

key acts as a channel level toggle. The first

push will take the level to 100% (regardless

of it’s current level), the second push will

take it 0% etc.

Mixing Manual Control Levels, Preheat

and DMX Input.

When the DMX Input Mode is set to HTP

Mix, the manual control levels are mixed on

a highest takes precedence (HTP) basis with

the incoming DMX signal and the channel

preheat levels. 

When the DMX Input Mode is set to DMX

Takes Precedence, the manual levels,

preheat, topset etc are ignored.

Chilli Master Controller 73-861-00 Issue 3

3 - 3 

User Interface

Содержание Chilli Master



































Отзывы: