22
OPERATING INSTRUCTIONS
23
1. Press the light button and hold for 2 seconds.
2. The light indicator is activated.
3. Quiet night mode.
4. When the quiet night mode is set, the variable light (MOOD LIGHT) is automatically
turned off.
• Press the light button and hold for 2 seconds again. The light will turn off and the
quiet night mode will continue.
1. Press the light button and hold for 2 seconds.
2. The light indicator is turned off.
3. Quiet night mode.
4. When the quiet night mode is set, the intensity of the light emitted is reduced
by 50%.
• The mood light shines in different colours depending
on the operational mode selected:
− Automatic /manual – blue
− Children’s mode – violet
− Rhythmic mode –
Blue - pink - violet - red
The mood light is reduced by 50% if the quiet night mode is selected.
2.8 CLEANING
ATTENTION!
Always unplug the appliance from the power socket before
cleaning.
✔
Cleaning the appliance casing
• Use a dry, soft cloth to clean the appliance.
If necessary, use a slightly damp cloth, but no polishing
agents.
✔
Cleaning the particle sensor
(once every two months)
• Open the cover of the particle sensor on the
right side of the appliance. Use a slightly
damp cotton bud (Q-tip) to clean the lens
and collect any remaining moisture.
✔
Cleaning the air inlets and outlets
Clean the air inlets and outlets with a soft brush.
Take care not to drop the brush into the appliance.
✔
Cleaning the negative ion generator
(once every two months)
Use a dry cotton bud (Q-tip) to dust the tag.
Take care not to drop the cotton bud (Q-tip) into the
appliance.
✔
Cleaning the front cover
• Remove the front cover of the appliance and use a dry
cloth or soft brush to dust it.
If necessary, use a slightly damp cloth, but no polishing
agents.
✔
Cleaning the lens on the back of the cover
(
once every
two months)
Remove the front cover of the appliance and use a dry
cloth, a soft brush or a cotton bud (Q-tip) to dust the mood
light on the back of the front cover. If necessary, use a
slightly damp cloth, but no polishing agents.
Always unplug the appliance from the power socket before you clean and
replace the fi lters.
The frequency with which fi lters need to be replaced will depend on the
quantity of pollutants in the room.
Fix the unit fi rst at the bottom of the appliance and then at the top.
THERAPY_AIR_ION_MANUAL_EN.indd 22-23
THERAPY_AIR_ION_MANUAL_EN.indd 22-23
17-01-2008 10:36:02
17-01-2008 10:36:02
