18
OPERATING INSTRUCTIONS
19
This appliance is strictly intended for use in closed rooms.
The Antibacterial fi lter
(Medium Filter)
/ HEPA fi lter / Antiallergic fi lter
(AG
allergy Filter)
/ Activated-carbon fi lter
(AC Deodorant Filter)
are packed for
transport and you need to remove all packaging before use.
Fix the unit fi rst at the bottom of the appliance and then at the top.
Insert the independent fi lter into the fi lter unit by levelling the fi lter and holders.
The AG fi lter against allergies should be positioned with the unwoven side
towards the front side of the appliance.
1.
Pull the bottom of the front cover and lift it. Remove the fi lter unit.
2.
Unpack the fi lters, remove the packaging. Insert the fi lters into the fi lter unit in the
following order: Pre / Medium / HEPA / AG Allergy Shield / AC Deodorant
2.6 PREPARATION
3.
Fix the frame fi rst at the bottom of the appliance and then at the top.
Put the front cover back into place on the appliance.
2.7 DIRECTIONS FOR USE
Automatic mode
When you turn the appliance on, the automatic operational indicator, a variable
light, will begin to give off a blue light.
1.
Plug the appliance into a power socket with the appropriate voltage (220-240 V).
2.
Press the button to start the appliance.
3.
Depending on the quality of the air in the room, the air fl ow speed will change
automatically from position 1 to position 4. The automatic operational indicator turns
on and the variable light will give off a blue light. The appliance will initially operate
automatically and then in the last mode selected.
Manual mode
Plug the appliance into a power socket with the appropriate voltage (220-240 V).
1.
Press the button to start the appliance and then the speed button; the variable
light gives off a blue light.
1.
2.
3.
4.
1.
2.
3.
THERAPY_AIR_ION_MANUAL_EN.indd 18-19
THERAPY_AIR_ION_MANUAL_EN.indd 18-19
17-01-2008 10:36:01
17-01-2008 10:36:01
